Low-Voc Industrial-Grade High-Efficiency Coated Sand Equipment of Premium Quality

• After-sales Service: Remote Warranty Service
• Warranty: 2 Years
• Control Type: PLC
• Model NO.: M500
• Customized: Customized
• Condition: New
• Automatic Grade: Automatic
• Certification: CE, RoHS, GS, ISO9001
• Type: Sand Casting
• Transport Package: Packing
• Specification: 4000
• Trademark: Haoyang
• Origin: Shandong
• Production Capacity: 10
• Package Size: 1000.00cm * 800.00cm * 1300.00cm
• Package Gross Weight: 1000.000kg

Product Description

Product Description

Coated Sand Equipment

The equipment is mainly used for mixing coated sand in thermalproduction.The working mechanism adopts the relative movement oiscraper and rotor, so that the materials in the machine disk can bestirred evenly in a very short time, so that the sand is coated with filmthe quality of sand mixing is good,the efficiency is high, and the sandblock has good fast crushing ability.

 

FEATURES AT A GLANCE

Transmission system includes main motor, rotor motor, reducer and transmitte narrow v-belt. As shown in figure 2. The main motor and the rotor motor installed on the bracket, both by the level of transmitte narrow v-belt couplet of (5 V - 10604) and reducer pulley connection, again through the level of cylindrical gear reduction. The main motor driven hollow shaft by hollow shaft driven in scraper. Rotor motor drives the rotor shaft, drive the rotor and scraper relative motion. Reducer is fixed below the sand mixer chassis, the cabinet is equipped with a magnetic oil plug is used to collect scrap iron in lubricating oil, in order to reduce the gear and bearing wear, prolong its service life.

Film mulching process:

A detailed description of the automatic technology and equipment for film covering sand is made in detail. The production line of the film coated sand is first made by three sand silos for the original sand No. 1 bucket 2 bucket and 3 iron sand bucket at the bottom of the three mouths designed for three pneumatic switches. It is a little far away from the electron, so the spiral feeder is used to put the iron sand into the electron, and the raw sand and the iron sand are quickly added to the roller reheating furnace after the electronic proportioning is added to the roller reheating furnace. The sand of the roller reheating furnace is joined by 2min30s, and the suitable heating temperature goes to the mixed sand. In the machine, the process of sand unloading requires 20S, the roller is in the reverse state, when the roller is unloaded, the roller is stopped from the reversal state to the turn, then second is heated and the sand under the sand mixer begins to add resin. The resin electronics calls the reserve fighting valve open, and then closed, the tree is closed. The tree is closed and the tree is closed after closing. The two resin reserve hopper above the fat (without a ratio with a resin bucket is also possible) to be added to the resin required by the electronically called internal phase by the spiral feeder. After the resin is weighed, the spiral feeder stops, the resin electronic call door is opened, and the signal is put into the weighing reserve bucket to wait for the next signal, after mixing 50-70S. At this time, the signal is transferred to the metering pump (time measurement) to add a certain amount, and then mixed with calcium powder after mixing 40-60S. After receiving the signal, the calcium powder is turned on the reserve fighting pneumatic door above the mixer, then closed, and the spiral feed is added to the calcium powder reserve bucket (time measurement) to wait for the next addition. Enter. 5S rear bottom air blower is unloaded after 10-30s, and after unloading (15s), the pneumatic door of the mixer is closed. In this analogy, we can write a relative procedure according to the technology required by your company.

Transmission system includes main motor, rotor motor, reducer and transmitte narrow v-belt. As shown in figure 2. The main motor and the rotor motor installed on the bracket, both by the level of transmitte narrow v-belt couplet of (5 V - 10604) and reducer pulley connection, again through the level of cylindrical gear reduction. 

Work consists of scraper and the rotor. Installed in the column on the set of two pieces of scraper and installed on the rotor of the three pieces of scraper, driven by the reducer output shaft relative motion. Two pieces of bottom scraper with hard alloy welded at the bottom of the knife block, in order to reduce wear and tear.

The main motor driven hollow shaft by hollow shaft driven in scraper. Rotor motor drives the rotor shaft, drive the rotor and
scraper relative motion. Reducer is fixed below the sand mixer chassis, the cabinet is equipped with a magnetic oil plug is used
to collect scrap iron in lubricating oil, in order to reduce the gear and bearing wear, prolong its service life.

Electric Control System

Model:Automatic or manual type

Control Unit: PLC .

P L C: Siemens, Omron or famous reliable

brand in China for your choice.

Emergency Stop: on main control panel and

rollers conveyors.

Power Indicator: available on control panel .

After Sales Service

Standard Warranty: 12 months or 2,000 operating hours (whichever comes first).
Extended Warranty: Optional coverage up to 36 months.
Global Support: 24/7 technical assistance and spare parts supply.
Training: On-site or remote operation/maintenance training.

Company Profile

Qingdao Haoyang Casting Machinery Co., Ltd

Qingdao Haoyang Casting Machinery Co., Ltd. is located in Qingdao, the hometown of casting, a world-famous coastal city. Covering an area of about 16,000m2, it is a professional equipment manufacturing company integrating design, development, manufacturing,installation and after-sales service. 20-200 tons/h clay sand mechanized molding line sand treatment equipment Annual output of 1000-10000 tons Casting self-hardening resin sand production line equipmentAnnual output of 1000-6,000 tons Casting water glass sand production line equipment 
Annual output of 3000-6,000 tons Casting thermal coating sand production line equipment 
V-style modeling production line equipment and stand-alone supporting equipment
Disappearing mold production line engineering and stand-alone supporting equipment 
Molding machine, molding machine, sandblasting machine, electric furnace, wire feeding machine, environmental protection dust collector and other casting machinery and smelting equipment 
Qingdao Haoyang Casting Machinery Co., Ltd. will adhere to innovation, continue to improve quality service, and make efforts to become a manufacturer of high-quality casting machinery and smelting equipment!

Packing & Delivery

FAQ

1. who are we?
We are based in Shandong, China, start from 2020,sell to Eastern Asia(50.00%),Africa(30.00%),Mid East(20.00%). There are total
about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
foundry machinery,Clay sand equipment,Resin sand equipment,Coating sand equipment,Old sand recycling equipment

4. why should you buy from us not from other suppliers?
The company has a long history and strong service and operational capabilities, as well as customization capabilities

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union;
Language Spoken:English,Chinese,Spanish,Japanese,German